The Abtex Three-Brush Planetary (Tri-Ten) Head deburring machine has been designed to provide optimum brushing motion in through-feed functions. Three, 10″ disc deburring brushes provide 207 sq. in. whole of abrasive floor space, in comparison with 151 sq. in. with six, 6″ brushes or 75 sq. in. with three,6″ brushes. Additional, unbiased variable velocity drives permit for job-to-job effective tuning of the rotary head-to-individual brush velocity ratio by the system operator.
We even have included a singular, operator-friendly approach to change out the deburring brushes on this deburring gear. There is no such thing as a threaded bolt or nut retaining the comb from beneath. As a substitute, the operator merely turns a horizontally situated set screw to launch or seize the comb through a “knob-headed” retaining pin. This eliminates the necessity for a spindle lock because the brush and middle retaining pin want solely be held up of their mounting place throughout set up and removing.
The Abtex Tri-Ten Deburring System design is the results of in depth lab work and greater than 25 years of machine constructing and brush utility expertise. Our method with all gear is to make deburring machines which are easy of their design, however strong of their development. The result’s overbuilt gear that performs reliably and successfully over the long run.

With our well-equipped Functions Lab, in addition to our experience in deburring brush manufacturing, utility analysis, and whole system design, Abtex is uniquely certified to satisfy your half ending necessities. Let’s discuss how Abtex will help you together with your half ending challenges. The mix of our deburring brush manufacturing and utility experience and our historic deburring machine design functionality will offer you one of the best whole Deburring System obtainable within the trade.

For info, name Abtex at 315.536.7403, e-mail gross or go to


Leave a Reply

Your email address will not be published.